You are viewing comment page 72 of the post. View the post contents here.
Tip: Press Ctrl+F to search for a specific keyword or keyword combination.
We've noticed that you're using an AdBlocker
It's not just you, over 66% of our site's visitors are blocking the ads.
Please disable adblock for this website and refresh this page if you:
find the content useful
want us to create more useful content and software
want tech support through the comment section
The ads are placed so that there is minimal interference with page reading. There are no pop-up, pop-under or sticky ads.
Alternatively, you can support us by making a donation.
The UniXonar installer should include a 'Lite Install' option:
* Install the C-Media panel only (without copying the buggy ASUS control panel and all its junk [DLLs, skins,files and settings] to the hard drive.
* Install OpenAL-Soft: http://kcat.strangesoft.net/openal.html
instead of ASUS GX 'accelerated' OpenAL driver.
CarvedInside - Contact with this guy (illusiveartgames) - perhaps he will let you use this skin: http://illusiveartgames.blogspot.com/p/skin-for-a...
for your drivers!
Your notes mention you disable channel delay -- Is it possible to configure this? I'd love to tune it for my room.
Check paragraph 8 of FAQ & Troubleshooting guide. Just added this out. Hope it helps.
Hi Some of us. I.E me, don't have a clue how to go about doing this fix “signtool catdb cmpudaxp64.cat” to get rid of test mode in Win 7 64bit. For the dumb among us can someone please give some simple 1,2,3 etc instructions. This would be most kind than k you.
New version is out: just remove old, install it - and it should do what is needed automatically.
@Jonny, from what I know SignTool.exe is a part of Visual Studio or Windows SDK.
Maybe these two links will help you :
http://www.microsoft.com/download/en/details.aspx...
http://msdn.microsoft.com/en-us/library/8s9b9yaz....
😉
"Owners of Xonar HDAV or of non-Asus cards might have trouble installing this version, in this case its recommended to install 1.50 Exp build 1 with test mode."
I strongly disagree: it's better to install v1.41 if you have troubles with v1.51 and don't know much about drivers than to enable test mode on Win7/Vista x64.
@qaz
Thank you it worked perfectly.
My Norton Anti-virus listed the 1.51 as having the WS.reputaion.1 virus.
False positive. Besides my local antivirus, media fire also scans files (with bitdefender).
Here you have log from virustotal.com.
FP is probably because of cleaning routine which deletes any remaining previous driver files from windows directory.
Out of curiosity which version of Norton Antivirus do you use?
Do I need to have the asus drivers installed first for this to work?
I tried without them and it keeps saying to connect my card.
No. What audio card do you have? and OS?
If you have time please try with 1.41 drivers and see if you get the same error.
xonar d2x win7 64bit.
I ll try the 1.41
had to go into safe mode for 1.41 to work as well for some reason. But its all fine now
<blockquote cite="#commentbody-3515">
CarvedInside :
False positive. Besides my local antivirus, media fire also scans files (with bitdefender).
Here you have log from virustotal.com.
FP is probably because of cleaning routine which deletes any remaining previous driver files from windows directory.
Out of curiosity which version of Norton Antivirus do you use?
It's the free Norton download through Comcast. Not by my computer right now, so I can't check which version of Norton.
Excuse me please, I might be blind...but...what are the enhancements from driver 1794 to 1796 ??
Thanks for replies!
Do I have to update?
I'm using the UniXonar 1.41 and I'm just very happy with it 😉
Norton 360 also detected same false positive and quarantined the exe as soon as done downloading for me.I just restored it and all's well.
Attempting to upgrade from 1.50 exp1 to 1.51. Uninstalled 1.50, disabled test mode, rebooted. 1.51 installer hangs at "Driver is installing. This should not take more than 60 seconds. Please wait..." I've tried installing Normal mode, and Low DPC latency + upmix mode and the same thing happens.
I’m running Win7 x64, and I waited a good 10 minutes each time.
Currently trying again with silent mode unchecked. Progress bar for “Installing UNi Xonar Audio Driver…” filled up very slowly, and nothing happened once it reached full.
Finally got it working, not sure what I did. It seems that the installer wasn't detecting the card properly, though, as it was asking me to connect it either right away or after a long wait. The time that it worked, I disabled it in Device Manager, then deleted it, then did Scan for Hardware Changes, then ran the Uni installer. That time, I immediately heard the Xonar DX's relays clicking, and the install worked fine.
Glad that you managed to make it work. Seems like the uninstall didn't went to well. Maybe this can be avoided if I will manage to improve the cleaning process.
UNi installer launches Asus/Cmedia Installer, which in silent mode won't show a thing even if its an error, and the installer bar completes when Cmedia installer is done.
Hope you don't mind that I edited you comments a bit for them to be more relevant.
Don't mind the editing at all, was just trying to share whatever information I could dig up in case it helps you and/or others.
The uninstall definitely had problems removing some files that it thought were in-use, but there were some installation attempts where no such problem occurred yet the install still failed.
From what I remember driver cleaning log show "can't find ...", thats always the same everytime. But I must have misread, if you say it shown problems removing some files.
You where right posting whatever information you could find 🙂
We don’t know whats new or improved. The change log from Asus wasn't to helpful, containing only some of the changes/improvements that where made. If you don't have any problems and you are happy with 1.41, then keep them!