You are viewing comment page 214 of the post. View the post contents here.
Tip: Press Ctrl+F to search for a specific keyword or keyword combination.
We've noticed that you're using an AdBlocker
It's not just you, over 66% of our site's visitors are blocking the ads.
Please disable adblock for this website and refresh this page if you:
find the content useful
want us to create more useful content and software
want tech support through the comment section
The ads are placed so that there is minimal interference with page reading. There are no pop-up, pop-under or sticky ads.
Alternatively, you can support us by making a donation.
Will this driver work with an ASUS XONAR AE 7.1 in Windows 10? If so, which one do I have to download?
No. As I have stated here, it won't and will not be supported.
In 7.1 and 5.1 mode, when using flexi bass, the stx II chops off the bass and sends it to the bass output on the daugterboard. But in 2 channel and 4 channel it chops off the bass and gets rid off it i cannot find the bass anywhere. Is there a solution for this, to keep the bass in 2 and 4 channel mode.
You've replied to someone else's comment instead of posting a new comment. To post a new comment you need to use the comment form at the bottom of the comment section. To post a reply to someone else's comment you use the Reply button floating on the right of that comment.
I have Windows10, version 1903, and OS-Build 18362.418. My personal computer is in a test mode.
I have just installed the audio card "XONAR HDAV 1.3 slim". When I tried to install its driver, I underwent the phenomenon "BSOD".
Why? What should I do? I want to install a driver without digital signature. How can I disable driver signature verification? Though I tried it, I underwent BSOD. What UNI driver do I need?
You don't get a BSOD when installing drivers that don't have a valid digital signature, unless that happens because of a Windows 10 bug. Maybe the driver version you tried has a problem with Xonar HDAV cards. Which drivers have you tried? Try different versions (1.80a, 1.75a, 1.71.1).
I can confirm that the Asus Xonar DSX works properly with my MSI B450 Tomahawk. One issue though I have run into (I've only tried 3 drives so far 1.75, 1.81a R3, and the official asus drivers) is whenever I have some other audio playing in the background like music. If I switch the input to stereo mix in windows or discord the soundcard causes my headphones to make a pop noise. This also occurs whenever I open discord while listening to music. I assume the audio buffer is being overflown.
Thank you for the info.
The pop noise when switching through the recording devices is normal behavior for the Xonar cards. I haven't found a way to eliminate that.
Salve. With x570 tuf wi-fi xonar d2x instant reboot in youtube video. Driver UNi Xonar W10 1825 v1.81a r2. error kernel 41 (63).
The board is ASUS TUF GAMING X570-PLUS (WI-FI) right?
Yes. Thanks.
any solution? csm in bios enable or disable?
Your comment above was initially written as a new comment instead of a reply to the current discussion. I moved it. For future comments, when replying to an existing discussion use the "Reply" button floating on the right of the comment you are replying to.
I have written here about possible solutions to these issues. Let me know if any of those worked for you.
ok. proverò su pci express 1x but i have poche speranze. thanks a lot
I switched PCI Express 16 x2 to 1x mode and it work ok. Thanks for supporting.
Please make a comment here with your motherboard, CPU, Xonar card and the name of the setting you changed.
In 7.1 and 5.1 mode, when using flexi bass, the stx II chops off the bass and sends it to the bass output on the daugterboard.
But in 2 channel and 4 channel it chops off the bass and gets rid off it because i cannot find the bass anywhere.
Is there a solution for this, to keep the bass in 2 and 4 channel mode and hopefully send it to the bass output on the daughtercard.
Hello.
My hardware:
Msi b350 tomahawk
AMD Ryzen 1300x
asus xonar dx
not work upmix stereo song
not create any dolby registry ( regedit )
Read FAQ Q&A 4 about stereo upmix configuration.
I do not understand what are you trying to do and what problem you have with Dolby.
if i play any song (dx setting 2 channel & 5.1)
that setting upmix working but if dx setting 6 channel & 5.1 not work upmix & dolby
I was looking into the Essence STX II 7.1. I have Win 10 latest version and an intel PC system. I have 2 front passive speakers, 2 powered subs, and a stereo amp for the two front passive speakers. I want to run 2.2 setup (just need 2.1 compatibility and I'll split sub out). I like the STX II 7.1 because of the analogue sub out. Can you setup a 2.1 system with this card/software? Does the Xonar software offer some type of crossover? There seems to be a lot of nuances to making this card work with new versions of Win 10. Is the sound/amp/hardware/software of this card worth the extra effort (rather than buying a new turn-key AE-7 or EVGA Nu Audio)? Any thoughts or input is appreciated.
Hello! Thanks for all your work on these drivers-- they really have saved me a lot in the past.
I've just moved house and I'm reinstalling my audio setup, Windows 10 x64 with a DSX. I'm outputting via DTS S/PDIF to an Onkyo TX-NR509. I'm setup in standard 5.1 configuration with the output device set to 24/96.
I'm getting a bit of an odd problem, though: my center channel is working, as when I test it with Windows, it comes through loud and clear. Unfortunately, whenever I try to use a native 5.1 application (Battlefield V has been one of my main test beds but this occurs in all games; BFV just has had known-good 5.1 for me in the past), I get audio from every surround and the subwoofer, but never the center channel. The only content where I have gotten any audio at all from my center channel is the Windows test, or when I force upmixing with Surround Max in XonarSwitch.
Any suggestions for things to try here? I realize this may not be an issue with your drivers, but I'm a bit out of my depth and I've tried everything I know how to fix.
Try with the sample rate set to 48kHz or 44.1kHz. According to the DTS Interactive specifications, it's limited to 5.1 channels at 48 kHz and 24bit.
I reintroduced a Xonar DG to my system with a generic ASMedia 1083-based PCI bridge and it worked out of the box. No configuration was done software wise, the card used to be in a motherboard with native PCI slots. I could even put the bridge's bracket on with some fudging.
if i play any song (dx setting 2 channel & 5.1)
that setting upmix working but if dx setting 6 channel & 5.1 not work upmix &(dolby setting)
Read FAQ Q&A 4 about stereo upmix configuration.
Hello,
With the absolute latest windows 10 update and using UNi Xonar W10 1825 v1.81a r2, I have to programs that always crash on windows shutodwn and seem to be related to HsMgr Application.
Details here on the EA forums: https://answers.ea.com/t5/Origin-Client-Web-Technical/Origin-preventing-windows-shutdown-windows-10/m-p/5834018#M16347
Any workarounds you suggest about this? Thanks
Have you enabled GX in ASUS Audio Center? If yes, disable it. If no, install the drivers with "Low DPC Latency" configuration or disable the HsMgr entries in "Task Manager"-> Startup after which end the HsMgr processes.
Windows 10 Pro 1909 (18363.418), Xonar DG, driver 1822 v1.75a r3. Works fine.
Thank you for the feedback.
What would be the best drivers for a fully up to date Windows 10 64-bit system? I am installing a Xonar DG PCI card.
You could go with v1.75a first.
Windows 10 Pro 1909 (18363.476), STXII drivers 11.5-v1.80b-r3
Asus Prime B450-Plus, all ok tho
Good to know. Thank you for the information. Let us know if this changes.
saw that the new bios with agesa 1.0.04b is out
really afraid to update since no rollback is allowed (still with agesa 1.0.03abba one thats is ok)
reed alot of problems with pci-ex peripherals and x570 mainboards
still don't know if also b450 have theese problems or only x570 with pci-ex gen4 support which seems is the main problem with the new bios
I don't see anything important with 1.0.0.4b to be worth updating except maybe faster boot. If your system works fine there is no need to update.
Discussions regarding some of the issues with AGESA 1.0.0.4B are taking place here.
Is there support for Xonar 5.1 SE?
No. Xonar SE is not and will not be supported as I have stated here.